Description

Mudcat MC915 Auger Dredge

PRICE $132,500 CDN
Construction material – Steel
•Length : 38’ 11″
•Width : 9′ 0″
•Height : O.A.8’8′
•Weight : 21,000 lbs. & Dry
•Draft : 21″
•Floating Clearance : 6’9″
•Fuel Capacity : 360 gallons
•Pontoons : Two 36″ x 32″ x 330″

10 Gauge H.R. Steel with Internal Bulkheads and Stiffeners; formed for rigidity; polyurethane foam filled
•Auger: Diameter 13-5/8″
•Pitch : 11″
•Flighting: 3/8″
•Speed: Up to 100 RPM
•Cutter Knives: 45 Detachable Heat-Treated Blades
•Cutter Bars: 36 Detachable Heat-Treated Blades
•Auger Torque; 16,500 in. lbs. Rotates to Cut Slope up to 45 degrees
•19″ x 9′ Hydraulically Adjustable Cut 9′ wide x 18″ maximum depth
•Operating: Depth-15′ maximum
•Detroit Diesel: 6-71 RC, 228 BHP @ 2100 RPM
•Clutch—Manual: 14″ Dia. Disc & Pressure Plate
•Reduction—Gear : Ratio 1.8/1—Drive Coupling Flex Type
•Centrifugal Closed Impeller
•Impeller Diameter: 19-1/2″
•Suction Diameter: 8″
•Discharge Diameter: 8″
•Shaft Diameter: 2-7/8″
•Capacity: 2000 GPM @ 1160 RPM against 180′ Head
•Material Removal: To 120 Cu. yds./hr.
•Capacity: 75 GPM @ 2800 RPM
•Pressure: 80 PSI

Dual Pumps
•Capacity Total: 30.5 GPM @ 1800 RPM
•Reservoir : 47 Gallon
•Circuit One: Auger Drive
•Circuit Two: Boom, Mud Shield and Winch

Relief Valve Setting:
•Auger : 3000 PSI
•Others: 1500 PSI

Treble Sheave Hydraulic Winch
•Traverse Speed: 50 FPM Maximum Forward & Reverse
•Average Cutting Speed: 8 to 12 FPM
•Voltage: 12V
•Alt. Output: 65 Ampere
•Batteries: 12V, 205 Ampere Hour, Parallel Wired
•Circuits: 2 Wire System Full Ground

Polyurethane finish coat on corrosion inhibitive epoxy primer
•Standard Colors: Green and White

Located in Ontario, Canada

Specifications

Disclaimer

Details on our listings are thought to be correct but are not guaranteed. Offers are subject to prior sale, price or inventory change, applicable taxes and withdrawal from the market without notice.

Location Map