Description

2011 Mudcat MC-910 Aluminum ENV Suction Dredge
Principal Dimensions and Characteristics
- Custom Built in 2011
- Length Over All: 11.62 m 38.11 feet
- Width: 2.74 m 9 feet
- Height Over All: 2.68 m 8.8 feet
- Draft: 533.4 mm 21 inches
- Floating Clearance: 1.80 m 5.9 feet
- Fuel Capacity: 1,325 liters 350 gallons

Floatation
- Pontoons - (2) Two: 914.4 mm x 812.8 mm x 10.06 m 36 in. x 32 in. x 33 feet
- .25” thick marine grade aluminum formed with Internal Bulkheads and Stiffeners:

Cutter Assembly
- Auger: Diameter: 4.15 m 13.625 feet
- Pitch: 279.4 mm 11 inches
- Flighting: 9.53 mm 0.375 inches
- Speed: Up to 100 RPM
- Cutter Knives: 45 Detachable Heat-Treated Blades
- Cutter Bars: 36 Detachable heat-Treated Blades
- Auger Torque: 18,000 in. lbs.
- Rotates to Cut Slope up to 45 degrees

Mud Shield
- Stainless steel Hydraulic Adjustable: 482.6 x 482.6 mm 19 x 19 inches

Boom
- Stainless steel tubular steel construction extendable to 38’ with additional floatation added

Working Capacity
- Cut (width x max. depth): 2.74 m x 457.2 mm 9 feet x 18 inches
- Maximum Digging Depth: 3.05 m 10 feet

Main Engine
- Make/Model: Detroit Diesel / 6-71 RC
- Power @ 1,800 RPM 130 kW 225 hp

Drive
- Clutch - Manual, 14 inch (355.6 mm) Diameter Disc & Pressure Plate
- Reduction - Gear Ratio: 1.55/1 - Drive Coupling Flex Type

Pump
- Type: Centrifugal Closed Impeller
- Impeller Diameter: 495.3 mm 19.5 inches
- Suction Diameter: 203.2 mm 8 inches
- Discharge Diameter: 152.4 mm 6 inches
- Shaft Diameter: 73.03 mm 2.875 inches
- Capacity: 2,000 GPM @ 1,160 RPM against 180' Head
- Material Removal (up to): 91.75 cubic meters/hr 120 cubic Yards/hr

Service
- Capacity: 75 GPM @ 1,800 RPM
- Water Pump Pressure: 80 PSI
- Hydraulic System Dual Pumps Capacity Total: 30.5 GPM @ 1,800 RPM
- Reservoir: 214 liters 47 gallons
- Circuit One: Auger Drive
- Circuit Two: Boom, Mud Shield and Winch

Relief Valve Setting
- Auger: 3,000 PSI
- Others: 1,800 PSI

Propulsion
- Treble Sheave Hydraulic Winch
- Traverse Speed - 50 FPM Maximum FWD & REV.
- Average Cutting Speed - 8 to 12 FPM
- Electrical System Voltage
- Electrical System Voltage: 12 V
- Alternator Output: 65 Amps
- Batteries: 12 V, 205 Amps/hr, Parallel Wires
- Average Cutting Speed: 8 to 12 FPM

Finish
- Aluminum finish

Color
- Aluminum finish

Located in Southern Ontario, Canada

Specifications

Disclaimer

Details on our listings are thought to be correct but are not guaranteed. Offers are subject to prior sale, price or inventory change, applicable taxes and withdrawal from the market without notice.

Location Map